Link budget
A chain of stages collapses into four numbers: gain, noise figure, intercept point and compression. Sensitivity and dynamic range follow from those. But the most useful column is not the total — it is “noise share”: it tells you which stage is holding the noise figure, and improving any other one is wasted effort until that one is fixed.
Levels along the chain
The upper line is the signal, the lower one the noise; the gap between them is the signal-to-noise ratio. Under each stage is its gain in dB. You can see exactly where the ratio starts to melt away.
Stage by stage
| Stage | G, dB | NF, dB | ΣG, dB | ΣNF, dB | noise share | signal, dBm | SNR, dB |
|---|---|---|---|---|---|---|---|
| LNA | 20.0 | 1.0 | 20.0 | 1.00 | 29 % | -90.0 | 22.2 |
| Cable 10 m | -2.0 | 2.0 | 18.0 | 1.02 | 1 % | -92.0 | 22.2 |
| Band-pass filter | -2.0 | 2.0 | 16.0 | 1.05 | 1 % | -94.0 | 22.1 |
| Mixer | -7.0 | 7.0 | 9.0 | 1.38 | 11 % | -101.0 | 21.8 |
| IF filter | -3.0 | 3.0 | 6.0 | 1.76 | 14 % | -104.0 | 21.4 |
| IF amplifier | 30.0 | 4.0 | 36.0 | 2.74 | 43 % | -74.0 | 20.4 |
The noise share is the stage’s part of the Friis sum above the source noise. The column adds up to 100 %.
What you get
| Gain | 36.0 dB |
|---|---|
| Noise figure | 2.74 dB |
| IIP3 | -11.4 dBm |
| OIP3 | 24.6 dBm |
| Input 1 dB compression | -21.4 dBm |
| Sensitivity (noise in the band) | -130.4 dBm |
| Dynamic range | 79 dB |
| Output signal | -74.0 dBm |
| Output noise | -94.4 dBm |
| Signal-to-noise ratio | 20.4 dB |
Sensitivity is −174 dBm/Hz plus the bandwidth plus the noise figure: the level at which the signal equals the chain’s own noise.