RF·Tools

Unit converter

Edit any field and the rest of the group follows. There is no master field: enter watts, dBm or volts, whichever you have.

Power, voltage, current

Voltage and current are for a sine wave into a resistive load.

Frequency and wavelength

Velocity factor: 1 in air, 0.66 for typical coax, 0.95 for insulated wire.

Matching

Ratios in decibels

10 dB is a factor of 10 in power, but 3.16 in voltage.

Noise floor

From −174 dBm/Hz at 290 K: thermal noise of a matched resistor plus the receiver noise figure.