RF·Tools

Transmission lines

Impedance from the dimensions, or a dimension for the impedance, plus what usually takes longest to find: velocity factor, delay, capacitance per metre and loss at the frequency you care about. The loss is split into copper and dielectric — they grow differently, and you see at once which one decides your case.

Line type

Leave “solve for Z0” empty and the dimensions you entered are analysed. Fill it in and one dimension is solved for: the width for strip lines, the gap for coplanar, the shield diameter for coax, the spacing for two-wire.

Cross-section

D/2dGND

Loss over frequency

Decibels per metre. Copper loss grows as the square root of frequency, dielectric loss linearly: where the curves cross is where it stops being one and starts being the other.

What you get

Characteristic impedance47.45 Ω
εeff2.250
Velocity factor0.667
Delay5.00 ns/m
Wavelength1.38 m
λ/40.345 m
Capacitance per metre105.4 pF/m
Inductance per metre237 nH/m
Loss0.139 dB/m
of which copper0.133 dB/m
of which dielectric0.006 dB/m
Over 1 m0.14 dB
Single mode up to33 GHz
the loss assumes solid copper and smooth surfaces: a real cable with a braid, tinning and a stranded core runs some thirty percent worse — check against the datasheet