Coupling-matrix filter
The usual synthesis starts from a prototype: you order an order and get a ladder whose skirts are whatever that order gives. Here it is the other way round — you say where the transmission zeros must be (at the band edges for a steep skirt, or right on an interfering transmitter), and the filter is computed to suit. A plain chain of resonators cannot do that: it needs couplings that bypass neighbours, which is why the diagram looks unfamiliar. What is computed is the coupling matrix, and from it the coupling coefficients and the external Q — the numbers you lay a board out with.
Coupling diagram
Circles are resonators, the squares at the ends are the source and the load. The arcs over the chain are couplings that bypass neighbours: they are what makes the zeros. A dashed arc means a negative coupling, and that is not decoration — the sign decides which side of the band the zero falls on, and on a board positive and negative couplings are made differently, magnetically or electrically, that is by a different relative placement of the resonators. The numbers under the circles, where present, are the resonator's offset from the band centre.
Response
Computed straight from the coupling matrix, with no line sections and no field solving: these are ideal resonators with the Q you gave.
Couplings
| Between | What it is | M | k |
|---|---|---|---|
| S — 1 | along the chain | 1.0765 | 0.04485 |
| 1 — 2 | along the chain | 0.9438 | 0.03933 |
| 2 — 3 | along the chain | 0.7546 | 0.03144 |
| 3 — 4 | along the chain | 0.9438 | 0.03933 |
| 4 — L | along the chain | 1.0765 | 0.04485 |
| 1 — 4 | cross coupling, makes a zero | -0.0744 | -0.00310 |
M is the normalised coupling; k = M·FBW is the coupling coefficient you then set with the gap between resonators. External Q: Qe 20.7 / 20.7 — it sets the tap point or the gap to the feed line.
What you get
| Band | 100 MHz (4%) |
|---|---|
| Passband loss | 0.03 dB |
| Return loss | ≥ 21.9 dB |
| Transmission zeros | 2250, 2560 MHz |
| Resonators | 4 |
The solution is exact: the response matches the ideal one to machine precision.
Resonator tuning
| 1 | 2400 MHz |
|---|---|
| 2 | 2400 MHz |
| 3 | 2400 MHz |
| 4 | 2400 MHz |
If the frequencies differ, the resonators are detuned on purpose: an asymmetric response cannot be had without it.
Dimensions on the board
| Hairpin arm | 19.3 mm |
|---|---|
| Track width | 1.10 mm |
| Fold gap | 1.02 mm |
| Tap from the fold | 3.54 mm |
| Between | k | Gap, mm |
|---|---|---|
| 1 — 2 | 0.03933 | 0.95 |
| 2 — 3 | 0.03144 | 1.14 |
| 3 — 4 | 0.03933 | 0.95 |
| 1 — 4 cross | -0.00310 | out of reach |
The resonator is a hairpin; the gaps come from the resonance splitting of a pair and the tap from the slope of the reflection phase — the same model as in the hairpin filter, and verified there. Every gap found is substituted back and checked: whatever does not agree is marked “out of reach” rather than handed over as a number. The placement of the resonators on the board is not drawn here: a cross coupling calls for a horseshoe, and that layout is still done by hand.