RF·Tools

Microstrip filters

A filter made of copper alone: stepped impedance, radial stubs, quarter-wave stubs, coupled lines, hairpins or a comb. The dimensions are computed for the substrate you name, and the response is computed from those very dimensions, with dispersion and loss. So the plot shows the real insertion loss and the spurious passbands the prototype knows nothing about. Hairpin and interdigital filters are solved with a multiconductor model: there every resonator couples to two neighbours at once, and a chain of pairs cannot describe that.

Type
 

Low-pass needs one frequency only. The refinement fits the dimensions to the response of the layout itself: the textbook calculation misses the cutoff by tens of per cent.

Layout

FR-4, 1.6 mm · size 78.7×40.9 mm Download SVG Download DXF
S1L1S2L2S3L3S4L4S520 mmrf.akzami.com

The copper is to scale; the circle is a via to ground. Steps and tee junctions are not modelled, so expect to trim the lengths a little in your PCB editor. Ctrl and the wheel, or a pinch, zooms; drag to move; a double click fits it back. The SVG and DXF carry the copper, the vias and the board outline — no dimensions, no scale bar; the sizes are real, in millimetres. The site address sits on a separate layer (MARK in the DXF) so that it cannot end up as copper on import — delete it if you do not want it.

Response of this layout

Download .s2p

A cascade of real line sections with dispersion and copper and dielectric loss — not the ideal prototype.

Dimensions

Element What it is Z, Ω θ, ° W, mm S, mm L, mm
S1 quarter-wave open stub 75 90 1.37 — 16.9
L1 quarter-wave connecting line 60 90 2.19 — 16.7
S2 quarter-wave open stub 46 90 3.52 — 16.3
L2 quarter-wave connecting line 61 90 2.11 — 16.7
S3 quarter-wave open stub 43 90 3.80 — 16.3
L3 quarter-wave connecting line 61 90 2.11 — 16.7
S4 quarter-wave open stub 46 90 3.52 — 16.3
L4 quarter-wave connecting line 60 90 2.19 — 16.7
S5 quarter-wave open stub 75 90 1.37 — 16.9
feed system-impedance line 50 — 3.02 — —

What you get

Passband loss1.72 dB
Return loss≥ 14.2 dB
Rejection in the notch≥ 61.8 dB
Board size78.7×40.9 mm
Substrateεr 4.40, h 1.60 mm

The dimensions were refined against the response of the structure. Before refinement the return loss was 12.0 dB.