RF·Tools

Microstrip filters

A filter made of copper alone: stepped impedance, radial stubs, quarter-wave stubs, coupled lines, hairpins or a comb. The dimensions are computed for the substrate you name, and the response is computed from those very dimensions, with dispersion and loss. So the plot shows the real insertion loss and the spurious passbands the prototype knows nothing about. Hairpin and interdigital filters are solved with a multiconductor model: there every resonator couples to two neighbours at once, and a chain of pairs cannot describe that.

Type
 

Low-pass needs one frequency only. The refinement fits the dimensions to the response of the layout itself: the textbook calculation misses the cutoff by tens of per cent.

Layout

FR-4, 1.6 mm · size 64.6×30.8 mm Download SVG Download DXF
R1R2R3R4R510 mmrf.akzami.com

The copper is to scale; the circle is a via to ground. Steps and tee junctions are not modelled, so expect to trim the lengths a little in your PCB editor. The bends are mitred at 45° across the full track width: a square corner in a strip line is a step in capacitance and extra radiation. The centre line does not move, so the tuning is unchanged. Ctrl and the wheel, or a pinch, zooms; drag to move; a double click fits it back. The SVG and DXF carry the copper, the vias and the board outline — no dimensions, no scale bar; the sizes are real, in millimetres. The site address sits on a separate layer (MARK in the DXF) so that it cannot end up as copper on import — delete it if you do not want it.

Response of this layout

Download .s2p

A cascade of real line sections with dispersion and copper and dielectric loss — not the ideal prototype.

Dimensions

Element What it is Z, Ω θ, ° W, mm S, mm L, mm
R1 half-wave hairpin, 0.64 mm fold gap 55 90 2.56 0.44 21.3
R2 half-wave hairpin, 7.67 mm fold gap 55 90 2.56 0.92 21.3
R3 half-wave hairpin, 7.67 mm fold gap 55 90 2.56 0.92 21.3
R4 half-wave hairpin, 7.67 mm fold gap 55 90 2.56 0.44 21.3
R5 half-wave hairpin, 0.64 mm fold gap 55 90 2.56 — 21.3
feed system-impedance line 50 — 3.02 — —

What you get

Passband loss3.31 dB
Return loss≥ 14.2 dB
Spurious passband7.7 GHz, -9.1 dB
Board size64.6×30.8 mm
Substrateεr 4.40, h 1.60 mm

The dimensions were refined against the response of the structure. Before refinement the return loss was 5.9 dB.

a spurious passband at 7.70 GHz (-9.1 dB) — distributed filters always have one; if it matters, follow the filter with a lumped-element low-pass
the hairpins alternate direction: in same-facing ones the electric and magnetic couplings cancel each other, and this bandwidth is out of their reach