RF·Tools

Transmission lines

Impedance from the dimensions, or a dimension for the impedance, plus what usually takes longest to find: velocity factor, delay, capacitance per metre and loss at the frequency you care about. The loss is split into copper and dielectric — they grow differently, and you see at once which one decides your case.

Line type

Leave “solve for Z0” empty and the dimensions you entered are analysed. Fill it in and one dimension is solved for: the width for strip lines, the gap for coplanar, the shield diameter for coax, the spacing for two-wire.

Cross-section

WSSh

Loss over frequency

Decibels per metre. Copper loss grows as the square root of frequency, dielectric loss linearly: where the curves cross is where it stops being one and starts being the other.

What you get

Characteristic impedance57.30 Ω
εeff1.544
Velocity factor0.805
Delay4.15 ns/m
Wavelength1.66 m
λ/40.416 m
Capacitance per metre72.3 pF/m
Inductance per metre238 nH/m
Loss0.259 dB/m
of which copper0.256 dB/m
of which dielectric0.003 dB/m
Over 1 m0.26 dB