RF·Tools

Transmission lines

Impedance from the dimensions, or a dimension for the impedance, plus what usually takes longest to find: velocity factor, delay, capacitance per metre and loss at the frequency you care about. The loss is split into copper and dielectric — they grow differently, and you see at once which one decides your case.

Line type

Leave “solve for Z0” empty and the dimensions you entered are analysed. Fill it in and one dimension is solved for: the width for strip lines, the gap for coplanar, the shield diameter for coax, the spacing for two-wire.

Cross-section

Wb

Loss over frequency

Decibels per metre. Copper loss grows as the square root of frequency, dielectric loss linearly: where the curves cross is where it stops being one and starts being the other.

What you get

Characteristic impedance26.68 Ω
εeff2.250
Velocity factor0.667
Delay5.00 ns/m
Wavelength1.38 m
λ/40.345 m
Capacitance per metre187.5 pF/m
Inductance per metre133 nH/m
Loss0.196 dB/m
of which copper0.190 dB/m
of which dielectric0.006 dB/m
Over 1 m0.20 dB
Single mode up to62.5 GHz