Transmission lines
Impedance from the dimensions, or a dimension for the impedance, plus what usually takes longest to find: velocity factor, delay, capacitance per metre and loss at the frequency you care about. The loss is split into copper and dielectric — they grow differently, and you see at once which one decides your case.
Cross-section
Loss over frequency
Decibels per metre. Copper loss grows as the square root of frequency, dielectric loss linearly: where the curves cross is where it stops being one and starts being the other.
What you get
| Characteristic impedance | 148.39 Ω |
|---|---|
| εeff | 2.250 |
| Velocity factor | 0.667 |
| Delay | 5.00 ns/m |
| Wavelength | 1.38 m |
| λ/4 | 0.345 m |
| Capacitance per metre | 33.7 pF/m |
| Inductance per metre | 742 nH/m |
| Loss | 0.071 dB/m |
| of which copper | 0.065 dB/m |
| of which dielectric | 0.006 dB/m |
| Over 1 m | 0.07 dB |
the loss ignores the proximity effect: on real ladder line the current crowds onto the facing sides of the wires and the loss comes out higher