RF Tools
A set of design tools for radio-frequency work: finding an off-the-shelf filter by its S-parameters, designing your own — lumped or in copper — matching, transmission lines, dividers, inductors and link budgets. Everything is computed from models rather than tables, and says plainly where the model lies.
RF filter finder
A catalogue of off-the-shelf filters: set the band and the rejection you need, and the finder checks candidates against S-parameters and datasheets.
827 filters, 827 with S-parameters, 1 manufacturer
Antenna calculator
Wire antennas, verticals, beams and loops: dimensions from frequency, matching, feedlines and stubs. For the dipole, Yagi, Moxon, quad and loops — a radiation pattern solved by the method of moments right in the browser.
Matching and attenuators
Resistive attenuators — Pi, T, bridged-T, an L pad between unequal impedances and a splitter: values from a standard series, the real attenuation and VSWR, and the power in each resistor. L, Pi and T reactive sections bring a complex load to the source: values, bandwidth and the loss in the network itself.
LC filter synthesis
Chebyshev or Butterworth turned into real inductor and capacitor values, single-ended or balanced: schematic, response computed from the E-series values and the finite Q, Touchstone export.
Microstrip filters
A printed filter laid out for your substrate: stepped-impedance low-pass, stub band-pass and band-stop, coupled-line, hairpin and interdigital band-pass. Track dimensions in millimetres, a to-scale drawing, SVG and DXF export, and the response computed from that same drawing — dispersion, loss and spurious passbands included.
Inductors
Solenoid, toroid on a core, planar spiral and a plain length of wire: inductance, Q, self-resonance and wire length. The turns are solved for a target inductance.
Link budget
Gain, noise figure, intercept point and compression down a chain of stages: sensitivity, dynamic range and a level diagram. And separately, each stage’s share of the noise — that is what tells you what to fix.
Transmission lines
Coaxial, microstrip, stripline, coplanar and two-wire: impedance from the dimensions or a dimension for the impedance, velocity factor, delay, capacitance per metre and loss — copper and dielectric separately.
Dividers and hybrids
Wilkinson divider, branch-line and rat-race hybrids in microstrip: track dimensions for your substrate, a scale drawing, SVG and DXF export, and S-parameters with isolation and phase difference computed from that same drawing.
Coupling-matrix filter
A filter to prescribed transmission zeros: put a zero where you want it and there it will be. The resonator coupling matrix is computed, and from it the coupling coefficients and the external Q.
Unit converter
dBm, watts, voltage and current; VSWR and return loss; frequency and wavelength; ratios in decibels.
The filter catalogue can also be browsed as a list — sorted by manufacturer, type, band and price.